NightRider Single NightDriver Heated 6″ Light Bar (N236EM-HL-1)

ECE/E-Mark certification for street legal* use, a heated lens to keep away ice and snow, high power OSRAM LEDs, a narrow profile for a sleek look, as well as a dual mounting system are all part of this bar!

ECE/EMARK automotive standards are the most widely recognized in the world and require strict rigorous testing before certification. The self heated lens is great for winter driving. Snow and ice will no longer be able to build up on your lens and reduce light output. The dual mounting system gives you the choice between using stainless steel side brackets or powder coated sliding back brackets. The high power OSRAM LEDs provide you with top quality lighting.

The NightDriver Series Heated Auxiliary High Beam Driving Light Bar is of the highest standards and lighting performance allowed on the street*.

Each light is clearly marked to allow law enforcement and vehicle inspectors easy identification for compliance.

Comes with complete wiring kit as well as side and rear mounting hardware.

Specifications: 
Size: 6″ Light Bar
Beam: Driving
Lumens: 4,320 Raw Lumens / 2,463 Effective Lumens
Colour Temperature: 6,000K – Daylight
Watts: 36W
Amp. Draw: 3A
Voltage Range: 10V-30V DC
LEDS: 12
Chip Type: 5W German OSRAM
IP Rating: IP67
Certification Standard: ECE-EMARK
Certification Test: ECE R112 (Auxiliary High Beam Driving Light)

Warranty: 2 Years From Ship Date

Always check with regional rules and regulations regarding the use of auxiliary driving lights. NightRider™ LEDS strives to deliver the safest and most lawful lights, but cannot be held accountable for regional restrictions, improper mounting, aiming, or wiring.